4. View network status

Press the “Printer Settings” button to popup submenu. The first item is the Network which shows the connection status.

• Wi-Fi Disconnected means the current Wi-Fi is not connected and needs setting.
• Wi-Fi Name means the current Wi-Fi is connected.
• Ethernet Disconnected means the current Ethernet is not connected and needs setting.
• Ethernet Connected means the current Ethernet is connected.

5. Set up the network

This function only supports setting via USB connection.

• Click the first Item, Wi-Fi list will pop up in the left if it is Wi-Fi connection;

  

  Click the Wi-Fi name on Wi-Fi list to pop up the IP address setting box.

  

  In the box you can enter password and obtain IP address automatically or set fixed IP address manually.

• Click the first Item, IP address setting box will pop up if it is Ethernet connection (software should be 1.2.0 or higher version and firmware should be 4.1 or higher version).

  

  In the box you can obtain IP address automatically or set fixed IP address manually.

• a. Find the SSID and Password on the side label.
• b. Access the Wi-Fi Setting of your mobile device or PC, and connect to Uniz3D##:##:##:##:##:## as shown in the SSID.
  

• a. Find IP address on the side label.
  
• b. Open the browser on mobile device or PC and enter the IP address; open the printer page and select the "Network" option
  
• c. Click Check Network to check if the printer is connected with internet.
• d. If the printer is not connected to the Internet, please choose your home Wi-Fi hotspot, type in password and click the Connect button to connect.
• e. After the printer is connected to your home Wi-Fi hotspot and Internet, disconnect your mobile device from the printer Wi-Fi and reconnect to home or office network.