Convert Intraoral Scans Into Dental Models
Convert Intraoral Scans Into Solid Dental Models
1. Import
Import the scan model into UNIZ Industrial
2. Set base height
3. Set cutting plane
Pick three points with the left mouse on surface to determine the cutting plane.
Or base the horizontal plane. But the necessary action is using manipulator to rotate the scan model and orient the occlusal surface up.
4.Trim
Click 'Repair' button, or click left mouse on the surface of model to trim extraneous data, and add a base with base-height.
Convert Intraoral Scans Into Hollow Dental Models
1. Import
Import the scan model into UNIZ Industrial
2. Set base height
3. Set cutting plane
Pick three points with the left mouse on surface to determine the cutting plane.
Or base the horizontal plane. But the necessary action is using manipulator to rotate the scan model and orient the occlusal surface up.
4.Trim and Add Base
Click 'Repair' button, or click left mouse on the surface of model to trim extraneous data, and add a base with base-height.
5.Hollow
Set the wall thickness and hollow out the solid model.
6.Split
Split the model at a height that slightly higher than wall thickness, and delete the lower extraneous part.
7.Hole
Dig a hole at the bottom of the model to prevent cupping.
8.Label (Optional)
Digitally text on dental models, to get ready for 3D printing.