UNBOXING

The SLASH 2 PLUS comes in reusable, durable packaging that has been specially designed to protect your printer in transport. To properly unpack your printer, please follow the steps described below.

START UNBOXING

Start unpacking by correctly orienting the cardboard box, and then slide the foam packaging out of the box by pulling the cardboard handle beneath the printer while holding the box.

You can scan the QR code to get the SN number of your printer.

OPEN IT UP

On the foam packaging, you will find the Quick Start Guide and accessories. Please insert the USB Wi-Fi into the USB port behind your printer.

REMOVE THE FOAM PACKAGING

On the top foam part, you will find all accessories of your SLASH 2 PLUS. Take these out and put them aside. Open up the package by removing the foam wrap at the middle. Now you may take out the printer and place it on your desk. Make sure you hold it by the aluminum casing while carrying it.

REMOVING PROTECTION WRAP

Remove the protection wrap around the machine and your SLASH 2 PLUS is ready to use!

SOFTWARE PREPARATION

Open a browser, open https://www.uniz.com/software

Choose the software according to your corresponding system and download UNIZ DENTAL installation file.

INSTALLATION

Windows

UNIZ DENTAL supports Windows 7 and above. Please use the following steps:

1. Double click the installation program.

2. Check the user agreement, and then follow the prompts to finish the installation.

Mac

UNIZ DENTAL supports Mac OS X 10.7 and above. Please use the following steps:

1. Double click the installation program.

2. Agree to the user agreement.

3. Drag UNIZ to your Applications folder.

Note

Once your computer is connected to the Internet, UNIZ DENTAL will detect new versions automatically and prompt whether you wish to update.