Slice Models

1.Click Slice button on the Top.

2.Click Slice button on the left tools to start slicing.

3.If the slicing is finished, slice viewer will open.

Check Slice

Once the slicing is completed, the software will automatically switch to the slice viewer.

Drag the sliding block up and down, and the left 3D window and 2D window will simultaneously display the slice at the height of the sliding block.

Upload Slice To Printer Via USB Flash Driver

4.Click SAVE button on the right side of the slice viewer to open a save dialog.

5.Select directory path and input slice file name.

6.Click SAVE button to start saving.

7.Copy the slice file to a USB flash driver (If you save directly to a USB flash drive, you can skip this step).

8.Insert the USB drive into the USB port on the printer, and then wait until the printer detects the USB drive.

9.Start printing on printer’s touch screen: choose the slice in USB tab you want to print and click Start button.

Upload Slice To Printer Via Network

1.Edit Task Name (optional).

2.Click SEND button on the right side of the slice viewer to the target printer.

3.Start printing on printer’s touch screen: choose the slice in Local File you want to print and click Start button.

If you want to change target printer, please click button to switch to Settings.

If the target printer is a virtual printer, the SEND button is unavailable, you need to select a real printer on Settings.