zMUD
Low Cost High Performance
Balanced Performance Combines Rigidity and Toughness.
01
Super Matte Surface
02
Ultra High Precision
03
Excellent Smooth Finish
Tech Specs
METRIC¹
Green²
Post-Cured³
Tensile Properties
Tensile Strength
15.8MPa
26.05MPa
Elongation at Break
43.48%
18.92%
Modulus
70.17MPa
210.77MPa
Flexural Properties
Flexural Strength
12.76MPa
47.24MPa
Flexural modulus
501.6MPa
1598.16MPa
Impact properties
Notched izod (Machined)
15.03J/m
11.69J/m
IMPERIAL¹
METHOD
IMPERIAL¹
Green²
Post-Cured³
2291.00psi
3777.25psi
GB/T 1040.1-2006
43.48%
18.92%
GB/T 1040.1-2006
10174.65psi
30561.65psi
GB/T 1040.1-2006
1850.2psi
6849.8psi
GB/T 1040.1-2006
72.74ksi
231.73ksi
GB/T 1040.1-2006
0.28ft-lbf/in
0.22ft-lbf/in
ASTM-D256
IMPERIAL¹
2291.00psi
3777.25psi
Tensile Properties
Tensile Strength
15.8MPa
26.05MPa
Elongation at Break
43.48%
18.92%
Modulus
10174.65psi
30561.65psi
Flexural Properties
Flexural Strength
1850.2psi
6849.8psi
Flexural modulus
72.74ksi
231.73ksi
Impact properties
Notched izod (Machined)
0.28ft-lbf/in
0.22ft-lbf/in
METHOD
Post-Cured³
Tensile Properties
Tensile Strength
ASTM D 638-14
Elongation at Break
ASTM D 638-14
Modulus
ASTM D 638-14
Flexural Properties
Flexural Strength
ASTM D 790-15
Flexural modulus
ASTM D 790-15
Impact properties
Notched izod (Machined)
ASTM-D256
Property
Result
ISO standard
Hardness shore D
91
ISO 868
Viscosity at 25℃
309mPa·s
1. Material properties can vary with part geometry, print orientation, print settings and temperature.
2. Data was obtained form green parts, printed using, 100 μm, Clear settings, without additional treatment.
3. Data was obtained form green parts, printed using, 100 μm, Clear settings and post-cured with 600 mW/cm2 of 405 nm LED light at 25℃ for 10 min.