3D Printers
Post Processing Devices
3D Printing Materials
ROI Calculator
Clinical Indications 
3D Printing Products
3D Printers
3D Printing Materials
ROI Calculator
World Record Speed
6 full arches in 5 minutes 
State-of-art Accuracy
±50µm, up to 95.87%
±100µm, up to 99.91%
Reliability
Patent Liquid Cooling System ensures unmatched longevity and production speed
U.S. Pat. No. 10399270
EU Pat. No. 17814680.9
CA Pat. No. 3021616
HK Pat. No.1223494
Patented efficiency liquid-cooling system
Maintain printing temperature below 40°C
Patented low force stereo peeling technology
Micro-stereo composite peeling structures
Patented high power collimated light source
16mW/cm² High Power, 95% Uniformity
Resin temperature control system
Maintain optimal reaction temperature
High-Accuracy 3D Printing Materials
zDental resins: A specially designed repertoire of high quality materials that are fine tuned for each unique application.
Bring production in-house or improve existing workflows even more.
One Printer, Limitless Applications
Rigorously validated materials and a high performing 3D printer go hand in hand in producing quick and high quality results.
Die Model/Implant Model- Study Model
- Orthodontics Model
- Aligner Model
- Customized Tray
- Surgical Guide
- Direct Aligner
- Indirect Bonding Tray
- Wax Crown & Bridge
- Denture Base
- Night Guard
- Gingival Mask
- Crown/Bridge
-
MATERIAL
zDental Model X Stone
-
PARTS PER PRINT
4
-
COST PER PART
$2.17
-
PRINT TIME
26 mins
*for display only, refer to the actual printed models
-
MATERIAL
zDental Model X Stone
-
PARTS PER PRINT
4
-
COST PER PART
$3.13
-
PRINT TIME
29 mins
*for display only, refer to the actual printed models
-
MATERIAL
zDental Model Gray V2
-
PARTS PER PRINT
6
-
COST PER PART
$2.32
-
PRINT TIME
7 mins
*for display only, refer to the actual printed models
-
MATERIAL
zDental Model Z Tan
-
PARTS PER PRINT
6
-
COST PER PART
$1.52
-
PRINT TIME
10 mins
*for display only, refer to the actual printed models
-
MATERIAL
zDental Tray
-
PARTS PER PRINT
4
-
COST PER PART
$6.70
-
PRINT TIME
12 mins
*for display only, refer to the actual printed models
-
MATERIAL
zSG Clear
-
PARTS PER PRINT
4
-
COST PER PART
$3.71
-
PRINT TIME
12 mins
*for display only, refer to the actual printed models
-
MATERIAL
zDental Clear Aligner
-
PARTS PER PRINT
8
-
COST PER PART
$3.33
-
PRINT TIME
29 mins
*for display only, refer to the actual printed models
-
MATERIAL
zDental IDB
-
PARTS PER PRINT
8
-
COST PER PART
$3.95
-
PRINT TIME
18 mins
*for display only, refer to the actual printed models
-
MATERIAL
zDental Cast
-
PARTS PER PRINT
40
-
COST PER PART
$0.44
-
PRINT TIME
14 mins
*for display only, refer to the actual printed models
-
MATERIAL
zDental Denture Base
-
PARTS PER PRINT
4
-
COST PER PART
$9.51
-
PRINT TIME
46 mins
*for display only, refer to the actual printed models
-
MATERIAL
zDental Night Guard
-
PARTS PER PRINT
9
-
COST PER PART
$4.97
-
PRINT TIME
59 mins
*for display only, refer to the actual printed models
-
MATERIAL
zDental Gingiva
-
PARTS PER PRINT
40
-
COST PER PART
$0.35
-
PRINT TIME
10 mins
*for display only, refer to the actual printed models
-
MATERIAL
zDental C&B A3
-
PARTS PER PRINT
5
-
COST PER PART
$0.11
-
PRINT TIME
16 mins
*for display only, refer to the actual printed models
Aligner Workflow (In-house)
20 Minutes from Start to Finish
Using an otimized and simple workflow from UNIZ,
a ready-to-use aligner can be produced trimmed and polished in just 20 minutes.
Design & Nesting
NBEE Print
Detach & Wash & Cure
5 mins
80 minutes+
by conventional DLP printers
Thermoform
3 mins X 2
Trim + Polish
2 mins X 2
Testimonials from Professionals
-
Dr. Melissa D Shotell, DMD, MS
- Board-Certified Orthodontist
- Orthodontic Consultant at Sonora Modern Dentistry & Orthodontics
The print speed is amazing!
Live printing of 6 arches in 5 minutes. I had them run the demo for me and it was incredible to see 6 arches print so fast! Uniz is also verified for direct printing aligners when Graphy resin. It is going to be great to see how the speed of this technology can work for same day starts!
-
Dr. Kenji Ojima
- President of JAPAN Academy of Aligner Orthodontics
- KOL DSD/Aligner
The most fastest 3D printer!
Thank you to Graphy and Uniz team today we start to manufacture about Shape memory Aligner from the most fastest 3D printer “UNIZ NBEE”.
-
Dr. Björn Ludwig & Dr. Christian Sander
- Assistant Professor at the University of Homburg / Saar, Department of Orthodontics.
- The editor in chief of the Quintessenz publication “Kieferorthopädie” (Orthodontics).
NBEE is the winner in matter of speed
I guess the NBEE is the winner in matter of speed，and my expert on this = Christian, as well.
-
Dr. Christian Brenes
- USA Top100 doctors 2022
- Professor at Medical University of South Carolina
- Founder of Digital Dentistry Edication
NBEE meets dental practice’s need
After a few months of using the NBEE 3D printer by Uniz; here are some of the key points of the evaluation; the complete eval will be in the online course.
1. Very easy to use hardware and software. Huge build plate to fit about 5-6 models horizontally and about 24 vertically.
2. The printer is big but is very fast, faster than slash.
3. The surface finish is quite good compare to many other printers.
4. More ideal for labs due to its size; more limited resins but the company is incorporating many resins in the next few months- open architecture is my thing.
5. Truly plug and play with built in Wi-Fi or Ethernet.
6. Built in touch screen and heater.
Contact Us
