Uniz Desktop Version Notes

Version Notes

VERSION NOTES - January 7, 2019


  • Slice Parameter Settings
    • Added Preferences. Users can set the slice parameters as a customized preference for the next printing.
    • Added LED Power settings. The LED Power setting has been removed from the Advanced Settings interface to the Slice Parameter Settings interface compare to the old version.
    • Deleted the restore default exposure time. The exposure time is no longer recorded, so there is no need to restore the default recommended exposure time.
  • Added the function of loading model management. It Implements the function of the selection, visibleness, duplicating, and deletion of currently loaded models.
  • Added the replacement reminder function when the running time of the accessories such as air pump and resin pump tube exceeded the critical level of lifetime, and the function of resetting the running time after the replacement of the accessories.
  • Strengthened the function of modifying the gap error.
  • Added the function of checking reminder of the resin tank before starting to print.
  • Fixed multiple bugs
    • Solved the bug of without saving the modification when saving the Uniz file.
    • Solved the abnormal display of the text and window on the high resolution monitor.
    • Solved the abnormity of switching printer type when loading models.
    • Solved the abnormity of deleting the first slicing segment on the Slice Parameters Setting interface.

VERSION NOTES - November 17, 2018


  • Increased the function of manually setting the number of the current section layers 
    • Double click the selected section bar, enter the number of layers, and press "Enter" to complete the modification.
  • Renewed the icons on the top of the software
  • Fixed multiple bugs
    • Fixed the bug of unit conversion after multiple scaling of the model in inches
    • Fixed the bug of using the shortcut keys "+" and "-" to increase and decrease the number of layers when setting slice parameters

VERSION NOTES - October 30, 2018


  • Added Example Prints, double-click to slice and print, to validate whether printer is in good working condition, available for both Natural Peel and UDP modes. Improved the matchup of Resin Type and Thickness as well as Exposure Time.
  • Model unit detection is added, switch between mm and inches is now possible.
  • Added UDP print mode introduction and slice parameter setting.
  • Added print report function.
  • Reworked main interface button icons.
  • Fixed some bugs

VERSION NOTES - October 10, 2018


  • Added a prompt function of "What's new"
  • Improved the matchup of Resin Type and Thickness as well as Exposure Time
  • Set Cool Down Time to zero automatically under UDP mode
  • Added detection and prompt of erroneous Exposure Time
  • Fixed bugs:
    • The support parameters are not updated timely with the change of the printer type
    • The section parameters are not updated timely with the change of the resin type

VERSION NOTES - August 14, 2018


  • Adaptive to new models of printers: SLASH OL/ SLASH PLUS UDP/ SLASH PRO OL/ SLASH PRO/ SLASH PRO UDP/ SLASH DJ2/ SLASH J UDP/ zSLTV-15
  • Improved slice function: add UDP mode and parameter settings for the first three layers
  • Added slice 3D display function
  • Added slice contraction and expansion function
  • Added slice filling function
  • Added base, connection and tilt angle options in Support
  • Added network and fixed IP address settings
  • Added Spanish to language settings
  • Added uploaded model management function
  • Fixed some bugs

VERSION NOTES - April 19, 2018


  • Optimized the detection algorithm of the model data validity
  • Added parameter display for existing slices
  • Added maximum and minimum limits for the exposure time
  • Improved the function of real-time detecting and monitoring model parameters changes
  • Fixed the bug that the linkage between the layer thickness and the exposure time is abnormal under extreme conditions
  • Fixed the bug appeared when consecutively using the shortcuts of "Select All" and "Duplicate Selected"

VERSION NOTES - March 9, 2018


  • Combine Uniz and Uniz+ into Uniz. You may choose printer type upon software start up
  • Added a new function for searching printer in LAN
  • Added a new function of printer WIFI setting via USB
  • Added a new function of activating or reactivating the printer with the current logged-in account
  • Added a new function of upgrading the printer firmware to the latest version
  • Added a new function of registering the printer to loT, turning on/off the remote monitor camera
  • Optimized model repairing algorithm
  • Bug Fixes

VERSION NOTES - December 9, 2017


  • Display the SN and the alias of the printer simultaneously
  • Corrected the algorithm that transforms the Quaternion to the Euler Angle
  • Improved USB communication function of the printer
  • Bug Fixes

VERSION NOTES - October 27, 2017


  • Improved USB plug-and-play/accidental disconnect function
  • Improved function of manual support structures
  • Bug Fixes

VERSION NOTES - September 30, 2017


  • Pre-validated online model store
  • Handy slice management
  • Customizable Z resolution
  • Intelligent automatic support
  • Advanced printer control
  • Single printer control
  • Standard model size (Up to 400MB)